|
Specifications: |
| No. of Channels |
2 Channels Bridgeable |
| Power Output |
100Watts RMS per channel, 200Watts RMS Bridged
4 ohms |
| Load |
4 and 2 ohms |
| THD |
0.05% max. |
| Signal to Noise Ratio |
-100db |
| Bandwidth |
20Hz-50Khz |
|
Special Features: |
| Built in Amplifier Variable Crossover |
HP and LP=100Hz selector |
| Built RCA Output Variable Crossover |
HP and LP 100 Hz selector |
| Preamp Output |
Switch selector IN/Out Signal |
| Short Circuit protection |
150 watts trigger sensor |
| DC Offset Protection |
Sensitivity 1.5Volts DC sensors |
| Automatic turn ON |
Sense Speaker input signals |
| Speaker Inputs |
Sensitivity 1V to 4 volts |
| RCA input |
Sensitivity 0.1 to 8v 0.5 nominal |
| Remote ON/OFF |
Antenna Input level |
| Topology |
Class A/B |
| Schematic |
DC to DC Power Supply, Class A/B, Fet-Pre-amp |
| Mechanical design |
Aluminum extrusion & steel plates |
| Bill of materials |
USA components |
